The Smart-Fly BatShare Deluxe HV is our High-Voltage version of the BatShare Deluxe. It enables you to use two battery packs to provide Dual-Redundant security to your airborne system. With the Smart-Fly BatShare Deluxe HV, you can tolerate a single failure (open-circuit, short-circuit, low voltage) in either battery pack, or switch, or battery wiring, without losing radio control. The BatShare Deluxe HV is our highest power BatShare with the lowest voltage drop. The BatShare Deluxe HV can be used with our Failsafe switches and our System Panels in addition to our SuperSwitchHDs.
The BatShare Deluxe HV comes with the XT-60 connector, which we feel will last longer and gives a better electrical connection than the Deans UltraPlug connector.
The Smart-Fly BatShare Deluxe HV continually monitors both battery packs and switches for the one with the higher voltage, and routes that to your Rx and servos. In practice, with two good packs, the BatShare Deluxe HV draws power equally from both packs, adding their individual capacities, i.e., if Battery #1 is a 2000mAH pack, and Battery #2 is a 2000mAH pack, you will have 4000mAH to fly on.
The Batshare Deluxe HV can be used with battery packs with a minimum voltage of 5.5V up to a maximum voltage of 8.4V. 4.8V NiCd/NiMH will NOT work with the BatShare Deluxe HV.
BatShare Deluxe HV Features:
- ♦ Input voltage range of 5.5V to 12.6V
♦ 13 Amps/Side Continuous Current
♦ 50 Amps/Side Peak Current (< 10 sec)
♦ Very Low Voltage Drop:
< 0.400V @ 13 Amps Each Side
♦ Input “ON” LED Per Side
♦ XT-60 Power Plugs
♦ Failsafe Switch Compatible
♦ System Panel Compatible
♦ “Power On” LED Connection
(Requires LED With Series Resistor)
♦ Charge Port For Each Battery
Batshare Deluxe HV
- Product Code: BS-DLX-HV
- Availability: In Stock